This coating provides the desired high corrosion and gloss to the various substrate surface. The main polymers used in these processes are acrylic urethanes, but primarily the polyurethane polymer that forms the coatings described below. “Electrophoretic lacquer coating” is preferred for electrophoretic coatings, which are described as the precipitation and subsequent cooking of the polymer or oligomer, which are in the form of a stable emulsion, as a result of pH change. Many of the lacquer coating problems have been overcome and have been used commercially under constant development for more than 25 years.
In the future, new markets will be created by applying paints that can be coated with metals such as copper and nickel, and even with the application of paints that are not affected by natural light and ultraviolet.
Technical and Economic Advantages:
It provides high corrosion resistance, although it varies in various sub-materials.
Since metal-like colors can be obtained, it offers economical surface solutions with only lacquer coating without any metal coating.
There is no color change in the transparent electrophoretic lacquer coating layer after cooking.
Since the ultraviolet resistance is very high, the coating on the piece does not change color even if it has been exposed to sunlight for years.
Excellent bottom metal adhesion is present in both dye and post dye systems.
Electrophoretic lacquer coated parts have high resistance against scratches. The lacquer layer is 4 – 5 H pencil hardness.
Due to the superior corrosion and double rub acetone test values, it is possible to capture target values with lower thicknesses.
It provides high corrosion resistance, although it varies in various sub-materials.
Since metal-like colors can be obtained, it offers economical surface solutions with only lacquer coating without any metal coating.
There is no color change in the transparent electrophoretic lacquer coating layer after cooking.
Since the ultraviolet resistance is very high, the coating on the piece does not change color even if it has been exposed to sunlight for years.
Excellent bottom metal adhesion is present in both dye and post dye systems.
Electrophoretic lacquer coated parts have high resistance against scratches. The lacquer layer is 4 – 5 H pencil hardness.
Due to the superior corrosion and double rub acetone test values, it is possible to capture target values with lower thicknesses.
